| Home | Instructions | R3 WIFI | |
1. Before Using• Red indicator light: Video function indication. • Blue indicator light: WIFI indication. • Long press the switch key to enter the system initialization, the red light is on. The camera default open WIFI mode. The blue light is on. If there is SD card, the red light flashes once then bright all the time. If there is no SD card, the red indicator light flashes. Long press mode key 2 seconds on the standby mode to turn off Wi-Fi function, the blue light is off. Then long press 2 seconds to open Wi-Fi, the blue light is on. The camera will automatically shut down if WIFI is off and no operation within 60 seconds under standby mode. • No SD card/No memory storage left: Turn off Wi-Fi, the red light flashes 5 times and then turns off; Turn on Wi-Fi, the red light flashes. • Low Power: The blue light is off, the red light turn off after 2 sec. 1.1 Product Structure 1. Mini USB 2. TF Card Slot 3. Notch for Attachment 4. Camera port 5. Indicator Light 6. On/Off Button 7. M Button 8. Infrared IR Night Vision Lamps 2. Basic Instructions2.1 How to charge The camera built-in rechargeable lithium battery, please charge it before the first using. Methods: 1. Connect the camera to computer,charge it with USB cable; 2. Charging while recording: Connect to external USB 5V charger or mobile power supplement; * The red indicator light is on and flashing normally when you charge the camera. When the red indicator light keeps on but stops flashing means charging is completed.( Please charge for more than 30 minutes to make sure the battery is fully charged.) Note: When the battery power is low, the red and blue indicator lights flash at the same time for about 5 seconds, the camera will shut-down automatically, enter into the protection state (The recording file will save automatically), the camera should be charged under this condition. 2.2 Charging While Recording Insert TF card, connect USB 5V charger or mobile power supplement with USB cable, start recording videos while charging the camera. Click any button to stop recording. Or the camera will keep recording until out of battery. 2.3 Reset If the machine crashes, the button can not be used normally, you can press the «Power» key and the «M» key to reset the machine, then it can be used normally. 2.4 Power Off If you want to shut down the camera under the video recording, photo taking, motion detection mode. Press «On/Off» button for about 6 seconds to shutdown the camera. ( The indicator light is off.) When the camera is under standby mode, the camera will shut-down automatically after one minute without any working mode. 2.5 Time Setting The camera will automatically create a TXT text document in the TF card directory. (As the pic ) Shutdown the camera, connect the camera to computer with USB cable, open TIMEREST.txt document. Edit and save the time you need in the document. ( Such as “ 20160804174726 Y ”) Boot up the camera to shoot videos, the video will show the time watermark you save in the txt document. You can use the same method if you don’t need time watermark. For example: 20150608192526 Y ( Have time watermark) 20150608192526 N ( Don’t have time watermark) Notice: 1. Be sure to insert the T-flash (Micro SD) card into the product. If the card have not TF/SD card inside, the camera can not be used normally when the red and blue indicator light flash at the same time. 2. Please keep the lens at the distance of 50cm or more in the environment with sufficient lighting. This way makes the images and videos stable with natural color, and scenery is clear. 2.6 Connect to a computer The camera can be directly connected to the computer under boot up, standby, or shutdown mode. It can be used as normal «U» disk and you can copy/paste/delete the file as usually do. Connect the camera to the computer, after a few seconds the computer will pop up the removable disk logo, when the blue indicator light is on, means the computer can identify the USB device and carry out data transmission, the red light is on means the camera is charging, the red light flashes for a long time means the camera is fully charged. Note: 1. After the unit is connected to the computer, if the computer does not recognize it, or if the removable disk is not ejected after 30 seconds, please reset it and try again. 2. It is recommended to use the TF card reader to read the video file directly to play, if you directly use the USB connection to save the machine built-in memory in the video file, the transmission can not keep up because of the data may be too large and resulting in playback is not smooth. 3. Mode Instructions3.1 Recording Mode 1. Boot up the camera, enter the standby mode. (The blue indicator light is on.) 2. Click the «M» button. (The red indicator light is flashing slowly.) Start recording 1080P HD videos. Save the video file, the red light is always on. 3. The video will safe video as segmented video every 5 minutes. The video will be loop covered if there is no enough storage. 4. Click the power button again to stop recording, back to standby mode. 5. Push the power button for a long time under the recording mode will shut down the camera. Recording file will be preserved automatically. 3.2 Recording Infrared Mode 1. Boot up the camera, enter the standby mode. (The blue indicator light is on.) 2. Push the power button. (The red indicator light is flashing slowly.) Start recording 1080P HD videos. 3. Click the «M» button under the RECORDING MODE to start infrared mode. (The red indicator light is flashing slowly.) 4. Click the «M» button for 2 seconds again, back to normal recording mode. (The red indicator light is flashing quickly.) 3.3 Photographs-taking Mode 1. Boot up the camera, enter the standby mode. (The blue indicator light is on.) 2. Click the switch button to start taking photographs. 3. Every click on the «Power» button is taking a pic. (The red indicator light flashes with each clicking.) 4. Photos will be preserved automatically as 12M (4032*3024) 5. Push the «Power» button for a long time will shut down the camera. 3.4 Wi-Fi 1. Wi-Fi connecting: Connect your phone or iPad to Wi-Fi ( Name is begin with JH-7602B***); default password is 12345678. 2. Indicator Light: If the blue light is always on that means the Wi-Fi mode is open or connected; If the blue light is flashing, that means the camera is transforming image signal through Wi-Fi. 3. Shooting Videos/Photos: Under Wi-Fi mode, you can choose to save recording files in your phone or in the SD card through APP; In the APP settings, the camera video resolution is optional as well. 3.5 Infrared Mode under Wi-Fi Mode 1. Long press key button for 2 seconds under Wi-Fi mode to open infrared mode. (The blue light flashes quickly, the red light flashes slowly.) 2. Long press key button for 2 seconds again to turn off infrared mode. (The blue light and the red light both flash quickly.) 3.6 USB You can connect to the computer with USB cable under any mode. But Wi-Fi function is closed and can not be open. 3.7 Download APP You can download and install the two-dimensional code by scanning the QR code on manual or on the outer box. APP QR Code 4. Parameters4.1 Relevant Parameters Video Format: AVI Video Code: M-JPEG Resolution: 1920×1080P Frame Rate: 30fps Proportion 16:9 Resolution: 12M (4032×3024) Picture Format: JPG Motion Detection: Support Battery type: Built-in high-capacity lithium polymer Battery capacity: 450mAh Working time: 2.5 hours Voltage: DC-5V Memory: Max up to 32GB Speed: High speed USB2.0 Port: Mini 8pin USB Support System: Windows me/2000/XP/2003/Vista; Mac Os; Linux Playing Software: Default Software 4.2 Notes Each time you use the battery and then charge, about to charge about 2-3 hours to fill, the indicator light is filled as much as possible after 30 minutes to ensure that the fully charged. Because this product is the real HD DV, the product power consumption is larger than the Purple, the shell material using zinc alloy parts, and the use of the product may cause hot, it’s normal phenomenon, please do not worry. The product has come through a long period of time tests. There can not be any product quality problems. R3 mini DV User Manual » |
DV135S WiFi Mini DV camera Built-in lithium polymer battery 560mAh provides up to 1.5 hours of continuous operation, the HDMI connector allows you to view the recorded video directly on your home TV, and the presence of activation of recording on the motion sensor - record only those moments when something is happening in the room and at the same time save Charge the battery and place on the memory card. |
Q7 WIFI camera WIFI / P2P network camera. HD-Q7 resolution 1280*720P. Q7 initialized state resolution 640*480 VGA. |
SQ11 HD 1080P mini DV Mini camera DV SQ11 with night illumination, motion sensor and viewing angle 140 ° The camera SQ11 has a built-in motion sensor, can shoot photos with a resolution of 4032x3024, and can also be used for recording in the process of charging from a 220V network or portable chargers, which increases the battery life by 30-40 times. Duration of work: 100 minutes (1 hour 40 minutes) in constant recording mode/ |
A9 WiFi mini camera HD real time recording and viewing. 150 degree wide angle, the camera provides a wide coverage scene, will not miss anything happened in your house. The camera provides excellent night vision, you can monitor even in dark surroundings. In the recording process, after the memory is full, it will automatically delete the previous video and keep the latest video. The video will be recorded if any motion is detected, which make your home or office more safe. Perfect for baby monitoring, pet monitoring, and home security monitoring. You can know what was happening when you were out of home. |
GPS GF-07 GF-07 GPS GSM GPRS Tracker SMS Global Locator. Enhanced alarm locator is a base station positioning in a best cost-effective, higher requirements for high-end customers, let you really buy the rest assured, with enjoyable. |
Xiaomi Mi Action Camera 4k This Xiaomi Camera Mini 2.4-inch touch screen action camera with 7 glass lens supports 4K 30fps video record, the six-axis EIS is more stable for shooting. It is useful to catching all your action moments and has a variety of necessary features which make it perfect for photo-shooting, outdoor sports, home security, deep-water probing, etc, allowing you to film at any time and anywhere. |
| Fr | De | It | Ru | Nl | Es | Jp | Dk | Se | Pt | Pl | Hu | Bg | |
R3 WiFi Instructions | © «Org-Info.Mobi» |
---|
| Home | User Manual | SQ11 | |
Operating Instructions SQ11 mini DVCharging Attention! Before using for the first time, fully charge the mini camera battery! This mini video camera has a built-in lithium-ion battery. You can perform charging in one of the following ways: 1. Connect the mini video camera to the USB port of your PC, stop recording first. 2. Connect the mini camera to a charger from a 220V network or a portable 5V charger. In this case, you can continue to use the mini-camera in the charging process. In the charging process, the blue and red LEDs will light constantly. After the mini camera battery is fully charged, the blue LED will light constantly and the red LED will turn off. • If the built-in battery is empty or there is not enough space on the memory card to continue, the blue and red LEDs on the mini camcorder will blink for 5 seconds simultaneously, after which the mini camcorder will save the recorded video and automatically turn off. • If the memory card is not installed, the blue and red LEDs of the Mini Recorder will blink simultaneously for 5 seconds, after which the Mini Camera will automatically turn off. • If the camcorder is in the standby mode and does not take any action on it, the camcorder automatically turns off after 1 minute to save the charge of the built-in battery. Video recording • Shooting video with a resolution of 1280X720P Press the «On / Off» button to turn on the mini camera - the blue LED will light up - the mini camcorder is in the video recording standby mode with 720p quality. Press the «On / Off» button once to start recording video - the blue LED will blink 3 times and go out - 720p video is recorded. The video will be automatically saved every 5 minutes. To stop recording, press the «On / Off» button. • Shooting video with a resolution of 1920X1080P Press the «On / Off» button to turn on the mini camera - the blue LED will light constantly. Press the «Mode» button once to enter the video capture mode with 1080p resolution - the red and blue LEDs will light simultaneously, the mini camera is in the video recording standby mode with 1080p quality. To start recording, press the «On / Off» button once - the blue LED will go out, and the red LED will blink 3 times and go out - the video is recorded with a quality of 1080p. The video will be automatically saved every 5 minutes. To stop recording, press the «On / Off» button. • Motion sensor video recording To do this, while in the 720p or 1080p video recording standby mode, press and hold the «Mode» button of the mini video camera for 3 seconds - the camcorder enters the motion sensor recording mode. If motion is detected, the video recording will start automatically, with red and blue LEDs blinking at the same time. When recording motion sensor, the video recording is automatically saved every 5 minutes. • Photo Press the «On / Off» button to turn on the camera - the blue LED will light up. Press the «Mode» button twice to enter the photographing mode - the red LED will stay lit. To take a picture, press the «On / Off» button once - the red LED blinks once, the photo is saved. The resolution of the received photos is 4032x3024. • Night light Press the «On / Off» button to turn it on. Press and hold the «On / Off» button for 2 seconds - the red LED will blink twice - the night illumination is on. To turn off the night illumination, press and hold the «On / Off» button for 2 seconds, the red LED will blink three times - the night illumination is turned off. • Shutdown To turn off the camcorder, press and hold the «On / Off» button for 6 seconds. If the Mini Camcorder is in the standby mode and is not in use, it automatically turns off after 1 minute. • Viewing files Connect the camcorder in the off state to the computer - after a few seconds it will automatically be detected as a removable disk. The blue indicator will indicate the transfer of information, and the red indicator will indicate the charging of the built-in battery. • Setting the date and time Connect the mini video camera to the computer. Setting the time is done by creating a text file named «TIMERSET.txt» in the root directory of the device's memory card, with the following content: «YYYYMMDDHHMMSS» «Y» (or «N», if you do not want the date and time stamp displayed on video files) For example, «20170625140003 Y» After saving the file, disconnect the video camera from the computer and turn it on. Parameters ● Video resolution: 1920x1080, 1280x720 ● Frame rate: 15, 30 frames per second ● Video file type: AVI ● Photo resolution: 4032x3024 ● Photo file type: JPEG ● Viewing angle: 140 ° ● Night illumination: 6 IR LEDs (range of 5 meters, DO NOT emit light!) ● Motion sensor: Yes (range 5 meters) ● Recording while charging: + ● Duration of work: • 100 minutes (1 hour 40 minutes) in constant recording mode • About 5 hours in motion sensor mode • 24/7 24/7 clock when external power is connected ● Support for memory cards: Micro SD up to 64GB ● Cyclic recording: + ● Operating temperature: -10 ° С + 60 ° С ● Humidity of the environment: 15-85% ● Dimensions: 23x23x23 mm, 15 grams Mini camera SQ11 with night illumination, motion sensor and viewing angle 140 °. Mini DV SQ11 is an improved version of the previous SQ8 and SQ9 The camera SQ11 has a built-in motion sensor, can shoot photos with a resolution of 4032x3024, and can also be used for recording in the process of charging from a 220V network or portable chargers, which increases the battery life by 30-40 times. |
| De | Es | Pt| It| Fr| Nl| Dk| Se| Fi| Pl| Cz| Jp | In | Vn| Ru | Hu | Gr | Ro | Kr | Cn | Sk | Si | Bg | Lt | |
SQ11 mini camera DV instruction | © «Org-Info.Mobi» |
---|